7075 T6 Solid Aluminum Bar 8mm 10mm Aluminum Round Square Rod Bar
7075 Aluminum Bar Characteristics:
7075 alloy metal aluminum bar belongs to Al-Zn-Mg-Cu super duralumin 7000 series aluminum alloy, has extremely high mechanical properties and high resistance to fatigue. Due to the fine grain structure inside 7075 aluminum alloy, it has excellent deep drilling performance, enhanced wear resistance of tools, good resistance to corrosion and attitude to hard, good mechanical properties and anti-exfoliation corrosion. Moreover, it has protective and decorative anodizing. At present, 7075 aluminum bar is the preferred metal material under the requirement of lightweight conditions with lower density and higher hardness. It is one of the most potential alloys for commercial use.
7075 Aluminum Bar Chemical Composition (%):
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | remaining |
7075 Aluminum Bar Mechanical Properties:
| Temper | Tensile Strength Rm/Mpa | Yield strength Rp0.2/Mpa | Elongationg Percentage A% | Hardness HB |
| 7075 T6 | Standard | ≥560 | Standard | ≥500 | Standard | ≥7 | _ |
| Actual | 610~630 | Actual | 545~560 | Actual | 9~11 | 155~160 |
| 7075 T651 | Standard | ≥560 | Standard | ≥500 | Standard | ≥7 | _ |
| Actual | 600~610 | Actual | 540~560 | Actual | 9~11 | 155~160 |
7075 Aluminum Bar Temper Classification:
| Annealing | TO |
| Hot work | T1 | H111 | H112 | |
| Cold work | H12 | H14 | H16 | H18 | H32 | H34 | H116 | H321 |
| Heat treatment | T3 | T4 | T5 | T6 | T8 | | | |
| Over aging treatment | T73 | T74 | T76 | T79 | | | | |
| Stress relieved | T351 | T451 | T651 | T7351 | T7451 | T7651 | T7951 | T851 |
7075 Aluminum Bar Information:
-Alloy:7075 this alloy has currently the highest strength, can replace carbon steel, widely used in military, aerospace. Due to the oxidation of the surface having a breakthrough in recent years, it has been used by civilian.
-Temper:T3, T351,T4,T451,T6,T651,T6511,T7351
-Diameter: 2mm--800mm
-Length: 1000mm--12000mm
-Features: Mechanical properties are the highest in aluminum, corrosion resistance is relatively poor, can be improved through the process. Heat treatment can achieve very high strength characteristics. It has good mechanical properties and anodic reaction.
-Applications: Mold manufacturing aircraft structural parts with plate free forging and die forging car parts sports equipment, tooling component, gear crank, electronic componen, high resistance structural parts for mechanical industry, aviation, defense, motorbike and automotive.
7075 Aluminum Bar Product Display:
Product Tags:
|
|
Extruded 7075 T6 Aluminum Round Bar 8mm 10mm Used In Military Aerospace Images
|
