Round Square 99.6% 1060 Solid Aluminum Bar Fast Annealing

1060 Welding Solid Aluminum Bar Aluminum Round Bar Rods Price

1060 Aluminum Bar Characteristics:

1060 aluminum bar, with an aluminum content of more than 99.6%, is also called pure aluminum bar, which belongs to a commonly used series in the aluminum bar family. 1060 aluminum bar has the characteristics of excellent electrical conductivity, extensibility of pure aluminum.
1060 requires corrosion resistance and formability, but the strength is not high. Chemical equipment is its typical use. Advantages of this series of aluminum bar: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage compared to other high-grade alloy aluminum. With good elongation and tensile strength, it can fully meet the general processing requirements (stamping, stretching) and high formability.

It is often used in the industrial manufacture of large storage tanks, so It is also a industrial pure aluminum, with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but low strength, heat treatment can not strengthen the machinability is not good; gas welding, hydrogen atom welding and contact welding, difficult to braze; easy to withstand various pressure processing and extension, bending.

1060 Aluminum Bar Chemical Composition (%):

1060 Aluminum Bar Features:
1. Good elongation and tensile strength, fully able to meet the conventional processing requirements (stamping, drawing) high formability.
2. High plasticity, corrosion resistance, electrical and thermal conductivity, but low strength, heat treatment can not strengthen the machinability is not good.
3. It can be gas welding, hydrogen atomic welding and contact welding, not easy to braze; easy to withstand a variety of pressure processing and extension, bending.

1060 Aluminum Bar Heat Treatment Process:
1. Fast annealing: the heating temperature is 350~410 degrees centigrade; with the effective thickness of the material, the heat preservation time is between 30 and 120min; cooling in air or water.
2. High-temperature annealing: the heating temperature is 350~500 DEG C; if the finished thickness is not less than 6mm, the holding time is 10 ~ 30min, if the thickness is less than 6mm, heat until all the sheet is hot, cooling in the air.
3. Low-temperature annealing: the heating temperature is 150~250 degrees centigrade; the heat preservation time is 2 ~ 3H; cooling in air or water.

1060 Aluminum Bar Packing & Shipping:

Plastic film or woven bag package

Wooden case or wooden pallet package

Package according to customer request

20ft container: 25 tons (can load 5.8m Max)

40ft container: 25 tons (can load 11.8m Max)

More than 100 tons: can pack by bulk vessel

99.6% Solid Aluminum Bar  

99.6% 1060 Aluminum Bar

1060 Aluminum Bar Fast annealing

Round Square 99.6% 1060 Solid Aluminum Bar Fast Annealing Images